Looking for an easy way to hang your farm gates?

 

No Drill / No weld -Adjustable Gate hardware hinges (for steel pipe posts)

We are the manufacture of a patent pending No Drill / No weld adjustable hinge for farm gates. Quickly install a gate in approximately 10 minutes. Tools needed 9/16″ end wrench or socket and crescent to install hinges. These gate brackets are made of heavy thick plate and sch. 40 steel pipe they will not slip or twist on post. 16′ gate installation no problem.   

As of May 1st we will be raising our prices due to production costs and Shipping fees.

We apologize for the inconvenience.

Made by a farmer for a farmer.
Made in the USA.
                 FARM SHOW ZineAs seen  in

 

J-BOLT NOT included with hinges !

Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair

EZ2

Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair EZ2

Introducing new to the market a patent pending device to install farm pipe gates.

You will receive a pair of hinges too hang one gate. In the package you will receive two hinges, 2 u-bolts , instructions, washers, and nuts. EZ Hinge Farm Gate hardware are fully adjustable.

The EZ Hinge Farm Gate hardware requires no welding or drilling for installation. Tools required to install a gate on an existing steel post area 9 /16" end wrench or socket and a crescent wrench. It takes about an average of 10 minutes to install the gate. ( J-bolt not included ). EZ Hinge Farm Gate hardware can be used for permanent fencing or easily removed for a temporary installation. EZ Hinge Farm Gate hinges are available for 2" O.D post, 2 3/8"- 2 1/2 " O.D , 2 7/8" - 3" O.D. and 3 1/2 " O.D posts. ( O.D means outside diameter ). EZ Hinge Farm Gate hardware is designed with stabilizer rods to prevent slippage or twisting on post. Made in the USA. There are 6 different sizes available. 2", 2 1/2, " 3" 3 1/2, " 4," 4 1/2" . Note: All EZ Hinge hinges will accept a 5/8" or 3/4" j-bolt .

When ordering :
It is important when ordering EZ Hinge Farm Gate brackets to make sure of your outside pipe dimensions. EZ Hinge measurements are maximum allowable outside diameter.





$29 In stock
2" Hinges 2" Painted and Packaged (0) 2" Unpainted and box shipped (-1.5)
Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair Buy farm gate Hinges- EZ Hinge Farm Gate| 2" O.D | NO DRILL | NO WELD- 1 Pair

 Advantages of EZ HINGE FARM GATE HARDWARE

 

1.  Fast E-Z and fully adjustable

2. One person installation in 10 mins or less

3. Easily hang a 16′ gate with no slipping or twisting of brackets on post

4. No longer is it necessary to haul a welder or generator to a field location

5. No strenuous drilling with t- handle drill motor and 3/4″ high dollar bit

6.  Tools Needed  –  a tap measure  9/16″ wrench or socket 10″ or 12″ crescent  adjustable wrench and a marker for hinge locations.

7.  Sizes – EZ Hinge Farm Gate Brackets are currently available in 6 different post sizes  2″ 2 1/2″  O.D 3″ O.D 3 1/2″ O.D 4″ O.D AND 4 1/2″ O.D . 

8. Reusable-  If your fencing needs to be changed, remove the EZ Hinge Farm Gate Hinge and reuse them at a new location .

9. If you have a burn ban in your state or your area- Their will be no waiting in hanging your farm gates with EZ Hinge . 

 

Prices subject to change without notice